Snelle service
Werkt uw apparatuur niet
optimaal? Onze eigen technische
dienst zorgt voor een snelle en
vakkundige reparatie.
Advies op maat
Wat heeft u nodig? Van een
machtigingsvrije portofoon
tot een geavanceerd digitaal
systeem.
Laagste prijsgarantie
Heeft u een offerte? Vraag ons
om een tegenvoorstel en u bent
verzekerd van de laagste prijs.
Daar kunt u op rekenen.
RigExpert AA-1000

RigExpert AA-1000 Antenna Analyzer 0.1 to 1000 MHz

Lees meer..

Beschikbaarheid: Op voorraad. Nog 1 exemplaar beschikbaar.

Normale prijs: € 899,00

Nu

Special Price € 749,00 Incl. btw

RigExpert AA-600, AA-1000 and AA-1400 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.

Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.

Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-600, AA-1000 and AA-1400 attractive for professionals and hobbyists.

AA-600, AA-1000 and AA-1400 are available in non-US version (with ability to display Smith chart) and US version (displaying a polar chart instead).

The following tasks are easily accomplished by using these analyzers:
Rapid check-out of an antenna
Tuning an antenna to resonance
Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parameters
Cable testing and fault location
Measuring capacitance or inductance of reactive loads

Comparison table of RigExpert antenna analyzers

Frequency range:
0.1 to 600 MHz - AA-600
0.1 to 1000 MHz - AA-1000
0.1 to 1400 MHz - AA-1400

Frequency entry: 1 kHz resolution

Measurement for 25, 50, 75 and 100-Ohm systems

SWR measurement range:
1 to 100 in numerical mode,
1 to 10 in graph mode

SWR display: numerical or easily-readable bar

R and X range:
0…10000, -10000…10000 in numerical mode,
0…1000, -1000…1000 in graph mode

Display modes:
- SWR at single or multiple frequencies
- SWR, return loss, R, X, Z, L, C at single frequency
- SWR graph, 80 points
- R, X graph, 80 points
- Smith (or polar) chart, 80 points
- TDR (Time Domain Reflectometer) graph

Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes.

RF output:
- Connector type: N
- Output signal shape: rectangular, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.
- Output power: -10 dBm (at 50 Ohm load)

Power:
- Three 1.5V, alcaline batteries, type AA *
- Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA
- Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
- When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface:
- 320x240 color TFT displaty
- 6x3 keys on the water-proof keypad
- Multilingual menus and help screens
- USB connection to a personal computer

Dimensions: 23x10x5.5 cm (9x4x2”)

Operating temperature: 0…40 °C (32…104 °F)

Weight: 650g (23 Oz)

* Batteries are not included with the analyzer.

Schrijf uw eigen review